Official Pricing - 2018 Equipment

FULL SYSTEM GAS HEAT

– 1.5 TON $6,000.00
– 2 TON $6,200.00
– 2.5 TON $6,400.00
– 3 TON $6,600.00
– 3.5 TON $6,900.00
– 4 TON $7,200.00
– 5 TON $7,600.00

FULL SYSTEM ELECTRIC HEAT

– 1.5 TON $6,000.00
– 2 TON $6,200.00
– 2.5 TON $6,400.00
– 3 TON $6,600.00
– 3.5 TON $6,900.00
– 4 TON $7,200.00
– 5 TON $7,600.00

FULL SYSTEM - HEAT PUMP

– 1.5 TON $6,500.00
– 2 TON $6,700.00
– 2.5 TON $6,800.00
– 3 TON $6,900.00
– 3.5 TON $7,200.00
– 4 TON $7,600.00
– 5 TON $8,000.00

FULL SYSTEM W/ GAS HEAT

– 1.5 TON $7,000.00
– 2 TON $7,200.00
– 2.5 TON $7,400.00
– 3 TON $7,800.00
– 3.5 TON $8,000.00
– 4 TON $8,200.00
– 5 TON $8,500.00

FULL SYSTEM ELECTRIC HEAT

– 1.5 TON $7,000.00
– 2 TON $7,200.00
– 2.5 TON $7,400.00
– 3 TON $7,800.00
– 3.5 TON $8,000.00
– 4 TON $8,200.00
– 5 TON $8,500.00

FULL SYSTEM - HEAT PUMP

– 1.5 TON $7,500.00
– 2 TON $7,700.00
– 2.5 TON $7,900.00
– 3 TON $8,300.00
– 3.5 TON $8,500.00
– 4 TON $8,700.00
– 5 TON $9,000.00

FULL SYSTEM W/ GAS HEAT

– 2 TON $10,000.00
– 3 TON $10,500.00
– 4 TON $11,000.00
– 5 TON $11,500.00

FULL SYSTEM ELECTRIC HEAT - PUMP

– 2 TON $10,500.00
– 3 TON $11,000.00
– 4 TON $11,500.00
– 5 TON $12,000.00

FULL SYSTEM W/ GAS HEAT

– 2 TON $12,000.00
– 3 TON $12,500.00
– 4 TON $13,000.00
– 5 TON $13,500.00

FULL SYSTEM ELECTRIC HEAT - PUMP

– 2 TON $12,500.00
– 3 TON $13,000.00
– 4 TON $13,500.00
– 5 TON $14,000.00

14 SEER

– 1.5 TON $4,400.00
– 2 TON $4,500.00
– 2.5 TON $4,600.00
– 3 TON $4,800.00
– 3.5 TON $5,200.00
– 4 TON $5,400.00
– 5 TON $5,600.00

16 SEER

–     1.5 TON $4,800.00

–     2 TON $4,900.00

–     2.5 TON $5,000.00

–     3 TON $5,200.00

–     3.5 TON $5,600.00

–     4 TON $5,800.00

–     5 TON $6,000.00

ALL COIL AND CONDENSER REPLACEMENTS INCLUDE:

– 10 year parts and labor warranty (does not cover existing furnace when only coil and condenser is replaced)
– New supply plenum
– New emergency drain pan and overflow float switch
– New liquid line dryer & outdoor disconnect
– New condenser pad (if required)

FULL SYSTEM 16 SEER HEAT PUMP

– 1 TON $3,500.00
– 1.5 TON $3,800.00
– 2 TON $4,200.00
– 2.5 TON $4,600.00
– 3 TON $5,000.00

FULL SYSTEM 18 SEER HEAT PUMP

– 1 TON $3,900.00
– 1.5 TON $4,200.00
– 2 TON $4,600.00
– 2.5 TON $5,000.00
– 3 TON $5,400.00

FULL SYSTEM 20 SEER HEAT PUMP

– 1 TON $4,500.00
– 1.5 TON $4,800.00
– 2 TON $5,200.00
– 2.5 TON $5,600.00
– 3 TON $6,000.00

FULL SYSTEM 21 SEER HEAT PUMP

– 1 TON $5,400.00
– 1.5 TON $5,800.00
– 2 TON $6,200.00
– 2.5 TON $6,600.00
– 3 TON $7,000.00

ALL MINI SPLIT INSTALLATIONS INCLUDE:

– 10 year parts and labor warranty on all parts
– New Copper Line Set & Line-Set Cover
– New Thermostat (Remote Control)
– New Power Supply To Mini Split w/ Disconnect
– New liquid line dryer
– New condenser pad (if required)

– GENERAL P/M $100 1st SYSTEM, $80 EACH ADDITIONAL (PREVENTATIVE MAINTENANCE)
– DEEP CLEAN (REMOVE TOP) CONDENSER COIL WASH $40 PER UNIT
– REMOVE, CLEAN, RE-INSTALL EVAPORATOR COIL (EVAP COIL DEEP CLEAN) $500
– DEEP CLEAN DRAIN CLEAN-OUT (HIGH PRESSURE NITROGEN & UNDER-SINK TIE-IN) $120
– INSTALL OR REPLACE RETURN PLENUM $400
– INSTALL OR REPLACE SUPPLY PLENUM $400
– INSTALL NEW SUPPLY VENT (FLEX DUCT, COLLAR, BOOT & REGISTER) PER RUN $250
– INSTALL NEW RETURN VENT (FLEX DUCT, COLLAR, BOOT & REGISTER) PER RUN $300
– NEW TRANE CLEAN EFFECTS, WHOLE HOME ELECTRONIC AIR PURIFIER (In-Duct, 24V Powered) $1,200
– NEW 4” HONEYWELL MEDIA AIR CLEANER $450
– RE-SEAL SUPPLY AND RETURN PLENUMS $150 ea.
– INSTALL OR REPLACE EMERGENCY DRAIN PAN $250
– INSTALL OR REPLACE EMERGENCY OVERFLOW FLOAT SWITCH $100
– REPLACE THERMOSTATIC EXPANSION VALVE (TXV) $400
– REPLACE CONTACTOR $120
– REPLACE CAPACITOR (DUAL) $100
– INSTALL OR REPLACE FAN REGULATING PRESSURE CONTROL $450
– INSTALL OR REPLACE HARD START KIT $120
– REPLACE CONDENSER FAN MOTOR $450
– REPLACE STANDARD SWITCHING RELAY $80
– REPLACE LOW VOLTAGE FUSE $20
– REPLACE LOW VOLTAGE TRANSFORMER $150
– REPLACE HEAT SEQUENCER RELAY $150
– REPLACE HEATING FLAME SENSOR $100
– REPLACE INDUCER PRESSURE SWITCH $140
– REPLACE INDOOR BLOWER MOTOR $600 (Excludes ECM Blower Motors)
– INSTALL OR REPLACE LIMIT SWITCH $120 (ALL TYPES)
– REPLACE ARMAFLEX $20 PER FOOT
– REPLACE T STAT WIRE $5 PER FOOT
– REPLACE THERMOSTAT $150 (Includes basic thermostat, additional cost apply for WiFi enabled options)
– REPLACE OUTDOOR DISCONNECT $250
– REPLACE OUTDOOR ELECTRICAL WHIP $100
– FREON R22 PER POUND $95*
– PURON R410 PER POUND $55*
– LEAK TEST, HIGH PRESSURE NITROGEN (LEAK LOCATE) $250
– ADD DECKING IN ATTIC (PRICE PER 4X8 SHEET) $200
– INSTALL MANUAL DAMPER IN EXISITNG SYSTEM $100 ea.
– INSTALL ZONING IN EXISTING SYSTEM (INCL. T-STAT, DAMPER, ZONE CONTROL BOARD) $750 PER ZONE

*Cost fluctuates according to market price. Please contact us for current pricing.